HILTI TE 80-ATC AVR 110v 1700w 10.2kg SDS MAX COMBI HAMMER / DEMOLITION BREAKER. C/w 2 x NEW IRWIN SPEEDHAMMER SDS MAX CHISELS. This Hilti TE80-ATC AVR 110v 1700W 10.2kg SDS Max Combi Hammer Breaker is in good condition and in perfect working order. 1 x Used Hilti TE 80-ATC AVR Carrying Case. New Red ATC AVR Cover. New Motor End Cap. New Chuck Rubber End Cap. New Carbon Brush Set. New Speed Selector Button. Gearbox Re-Oiled with Genuine Hilti Oil. This machine has been fully serviced and comes complete with our. Hammer drilling in concrete, masonry and natural stone in the 22 to 150 mm diameter range (optimum). Drilling through-holes up to 150 mm diameter in concrete and masonry. Heavy chiselling using pointed, flat, wide-flat and mortar or bushing tools. Drilling with high torque in wood and steel. Best performance-to-weight ratio in the 10 kg class. Unequalled 360 r. Drilling speed for maximum performance in repetitive drilling applications standard in the class is approx. Optimized safety clutch. This Guarantee does not apply where. Repairs have been made or attempted by others. Repairs are required because of normal wear and tear (cable damage, etc). The tool has been abused, misused or improperly maintained. Alterations have been made to the tool. IMPORTANT : HILTI RED LIGHT SERVICE INDICATOR. This machine has been fully serviced however, Hilti Electronic Units are designed to activate the Red Light Service Indicator after 200 Hours use and can only be reset once the light comes on. After the indicator lights up, the machine can be used for approx. 10 more hours before the automatic cut out is activated after which it will completely shut down and may be irrepairable. As soon as the Red Light Indicator lights up, you should have the machine taken to a professional repair shop for an Electronic Unit Reset before the automatic cut is activated. FREE ELECTRONIC UNIT RESET.